ND-2011 Surgical Electric Wire and Pin Drill for Intramedullary Nail
1) Variable speed, convenient
2) High coaxiality, lower-noise
3) Powerful motor
4) Autoclavable
1. Technical Data
Output power |
130W |
Speed(r.p.m) |
0-16000rpm |
Noise(db) |
≤75 |
Sterilization |
≤135ºC |
Operation voltage(V) |
14.4V |
Weight |
5KG |
Charging time |
About 3 hours |
Charger Input Power |
AC 220V, 50Hz |
Non-loaded speed |
0-680r/min |
Diameter run-out |
≤ 0.5mm |
2. Product Techinical Merits
1) Autoclavable
2) This item can be used for internal fixation with steel plate.
3) Can be used for veterinary.
4) 4.0mm hollow for all brand needles to pass through.
5) Ni-MH battery without memory enviroment.
6) With a canula diameter of 4.2mm, holds k-wires or holds flexible. Reamer in intramedullary interlocking nail operation.
3. Product Display
Standard Configuration
-One drill chuck with key
-One battery
-One charger
-One hand piece
-One sterilizing channel
-One aluminium box
4. Certificate
5. Ordering Process
6. Attention & Notes
1.Our products are chargeable, if your electricity source is 110V-120V/60Hz, we can send you a transformer, then our products can be charging by our charger by 220V/50Hz. |
2. The device is forbidden to be demolished by non-professionals. If any
problem, please contact with us for after sales service. |
3.The battery cannot be disinfected. The battery space should be dry after sterilization. |
4. The battery needs to be taken out of the machine's mobile phone, otherwise a small automatic discharge will shorten the battery life. |
5.Saw blade, the drill bit is cleaned with a purifier and kept dry after operation. |
6.The sterilization temperature is lower than 135 degrees Celsius. If it exceeds 135 degrees Celsius, the motor will be damaged. |
7.Professional manufacturer with 24 hours online service, warranty offered, CE marked. |
8.Our products are chargeable, it can match for electricity source 110V60Hz-220V/50Hz. |