ND-2011 Autoclavable Orthopedic Electric Cannulated Drill
1. Technical Data
Output power |
130W |
Speed(r.p.m) |
0-16000rpm |
Noise(db) |
≤65 |
Sterilization |
135ºC |
Operation voltage(V) |
14.4V |
Weight |
5KG |
Charging time |
About 3 hours |
Battery Working Time |
About 40minutes |
Charger Input Power |
AC 220V, 50Hz |
Non-loaded speed |
0~800rpm |
Radial run-out |
Less than 0.5mm |
2. Product Technical Merits
(1): Axial run-out of cincentricity is within 0.05mm
(2): Rotating speed: 600 rpm
(3): Ritated torque 3.5n/m
(4): Supporting the interface of the brand productsv: Semiluser surface treatment technology gives the operator more comfortable operation
(5): Multipurpose interface is easier to use in clinic
(6): 4.0mm hollow for all brand needles to pass througth
(7): Ni-MH battery without memory environment
Standard configuration
I: One hand piece
Ii: One battery
Iii: One charger
Iv: One drill chuck
V: One sterilizing channel
Vi: One aluminium box
3. Product Display
4. Certificate
5. Ordering Process
6. Attention & Notes
1.Our products are chargeable, if your electricity source is 110V-120V/60Hz, we can send you a transformer, then our products can be charging by our charger by 220V/50Hz. |
2. The device is forbidden to be demolished by non-professionals. If any
problem, please contact with us for after sales service. |
3.The battery cannot be disinfected. The battery space should be dry after sterilization. |
4. The battery needs to be taken out of the machine's mobile phone, otherwise a small automatic discharge will shorten the battery life. |
5.Saw blade, the drill bit is cleaned with a purifier and kept dry after operation. |
6.The sterilization temperature is lower than 135 degrees Celsius. If it exceeds 135 degrees Celsius, the motor will be damaged. |
7.Professional manufacturer with 24 hours online service, warranty offered, CE marked. |
8. Our products are chargeable and can be fit for 110V/50HZ-120V/60Hz well. |
9. Delivery time: 3 days after payment |